61+lAJpiWtL._AC_UL320_.jpg
61%2BlAJpiWtL._AC_SL1200_.jpg61kdK7Z9HYL._AC_SL1200_.jpg619y78uzgsL._AC_SL1200_.jpg71mu1-TQXeL._AC_SL1200_.jpg61%2BIrRn4qRL._AC_SL1200_.jpg71XiHXuPtnL._AC_SL1200_.jpg61xCV9MeMVL._AC_SL1200_.jpg

Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Toguard, Vantrue N2 Pro, N2, T2, N1 Pro, X4 Cameras

$15.99

1000 in stock

Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Toguard, Vantrue N2 Pro, N2, T2, N1 Pro, X4 Cameras Description

Vantrue N2 Pro Uber Dual Dash Cam Vantrue T2 Supercapacitor Dash CamVantrue N1 Pro Dash CamVantrue N2 Uber Dual Dash Cam Vantrue X4 4K Capacitor dash cam Resolution Dual:1920*1080 60fps, Single Front 1920×1080 60fps or 2560×1440 30fps1920x1080 30fps1920X1080 30fpsDual:1440×1080 30fps+1280×720 30fps, Single Front 1920×1080 30fps 4K 3840X2160P 30fps, 2560X1440P 60fps 2560×1440 30fpsLensF/1.8,170°+ F/2.0, 140° F/1.8, 160° F/1.8, 160°F/2.0, 170°+ F/2.0, 140° F/1.8, 160°Camera TypeFront+InsideFrontFrontFront+InsideFrontDisplay1.5“ inch 2“ inch1.5“ inch1.5“ inch3“ inchMicrophone & Speaker Built-in Built-in Built-in Built-in Built-inStorageUp to 256GB MicroSD CardUp to 256GB MicroSD CardUp to 256GB MicroSD CardUp to 64GB MicroSD CardUp to 256GB MicroSD CardBattery & ChargingBuilt in batterySupercapacitorBuilt in batteryBuilt in batterySupercapacitorGPS LoggerOptionalOptionalOptionalOptionalOptional Read more Key Features 24/7 Parking Surveillance Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. Directly to the ignition wire for power only so it can turn on and off with the ignition. Compatible 12 – 24V Vehicles This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power. Low Voltage Protection Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.4V(12V cars) or 22.8V(24V cars), thus preventing it draining the battery. Read more Installation Instruction Find the Correct Fuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on. Connect the Red Wire Once you’ve determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation. Ground the Hardwiring Kit Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards. Read more Key FeaturesCompatible with 12-24Vdc for car or truck installations. Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.Compatible with Apeman, Rexing, Toguard, Vantrue N2 Pro, N2, N1 Pro, T2, X4, X3, X1 and all the other mini usb dash cams! Keep 12V or 24V outlet free, charge your phone at the same time.Less static when you’re listening to the radio. Less Complicated Install with the installation video. What’s in the boxVantrue 11.5ft Mini USB Dash Cam Hardwire Kit with User ManualMini/LP ACN Add-A-Circuit Fuse HolderMini ACS Add-A-Circuit Fuse HolderATO ACU Add-A-Circuit Fuse HolderMicro2 Add-A-Circuit Fuse Holder Technical Details Connector: Mini USB Connector Input Voltage: DC 12V-24V Output Voltage: 5V Output Current: 1.5A Working Temperature: -22°F to 167°F (-30°C to 75°C) Cable Length: 11.5ft Low Voltage Protection: 11.4V for 12V vehicle; 22.8V for 24V vehicle. Read more 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V. 【24/7 Parking Surveillance without draining the battery】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. With the smart low voltage protection, it will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery. Note: If your car requires a start voltage higher than 11.4V for 24 hours parking mode, this hardwire kit may not work for your car. 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff. 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Apeman, Rexing, Toguard, Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1/X4, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn’t work for Vantrue S1 Dash Cam. 【Easy to Install】4 add a fuse holders included, simply find the right one for your car. Installation instruction and video included, easy to install. Your browser does not support HTML5 video.  Very easy to install with the provided add a fuses. I used this hardwire kit to installed my Ventrue Dascam in my car. I was very impressed on how EASY it was to do it. I am not very well with this sort of things by any means, but let me tell you. I looked up for the instructions on how to do it and the vendor sent me the video and I was able to do the WHOLE thing and maybe 30/40 minutes. If you are looking for a kit to installed your DashCam ….. this is it man. Great, awesome, amazing. The best part is that any questions you may have, the vendor answer you right away. He is with you to help you on anything you need. I love his product and I will buy from this vendor again. A+ The kit basically has everything doesn’t matter what kind of fuse box you have. The wires are also protect no need for a tape but if you would like to use go ahead.I hooked it up with my N2 Dual dash cam . The camera itself is awesome it records everything even in dark but the high quality recording drinks camera battery juice really fast! Hardwiring it was the only choice.If you are a everyday driver dotaxi/uber , I highly recommend you buying the camera with hardwire kit and 256gb sd card. Trust me it’s worth it. Likes: – Includes more than necessary to install: individuals leads and fuses for every type of fuse out there. – Quality crimps and components – Good length on the cables – Well packaged – Excellent priceDislikes: – It *may* interfere with your fuse box cover, although it is not very likely. – The extra slack cable has to be stored somewhere. Would be nice to have a way to shorten some of them.I would recommend this as a time and aggravation saver when installing a Dash Cam. It gives a cleaner final outcome compared to the OBD plug that comes with some Vantrue cameras. By the way, this works on all Dash Cams that take a mini-usb plug and 5V. You can choose to install it on an ACC switched circuit (key on) or an always on circuit, depending on your use case. If you want to have 24/7 monitoring, including motion detection, you need to have an always on circuit, which is what I did. Most cameras will shut off the main power and recording until they sense either a shock (acceleration) or motion is detected (check your specific camera’s specs for this option) at which time, they will turn back on and record. Hence the need for always-on power.To install the only tool you will need is one to loosen a bolt and slip the u-shaped ground connector around the base and re-tighten. Everything else requires just hands. Some may find additional tools useful, but they will not be necessary. Cord was (just) long enough to run through the dash, under the carpet, ub the A beam, around the glass and into the Mount. If you wire it into something that only gets power when the ignition is on, the camera will turn on when you drive and off when you aren’t. I first had it wired into constant power but it was recording 24/7 and would fill my storage quickly then was basically useless. So if you wire into constant, you need to remember to turn it off when you are done driving, unless you want to park and passively collect video of something ;). This one is a few dollars more than what you find on amazon, but its worth the money considering they give you 4 different kinds of fuses just in case. Set up was really easy, the fuse slot was a bit tight so you’ll have to really shove the fuse in there, but overall it was easy to install and it worked like a charm for my dash cam. Got my Vantrue N2 Pro along with this hardwire kit. Had it installed at a local shop (because I’m not savvy enough to do hardwire installs), and it works perfectly. In the month that I’ve had the camera and hardwire kit, it has paid off pleasantly. Video quality for the forward and interior shots is superb, and it actually helped fight a speeding ticket even without the GPS module (would have been easier with the GPS speed displayed).Will definitely be getting this kit and camera for all my family vehicles! I have used this cable in a couple different configurations to hard-wire my Vantrue dash cam over the past few months. I first used it attached to a fuse in my ignition circuit, so power was only provided to the camera when the ignition was in the ON position. It works great in this manner. Unfortunately the camera cannot work in “parking mode” when connected in this way, but at least you know it’s not drawing power when the vehicle is off.I have also tried this cable connected to one of the fuses that always has power. It also works in this manner, but note that it is always drawing power. In the description, it claims this unit has “Low voltage protection”. I see no evidence of this as my battery was drained over the course of just a few days to the point that I could barely start my vehicle. This is unfortunate because I’d really like to take advantage of “parking mode”, but I much prefer my vehicle to start over having some video footage in the low likelihood of damage while parked.So I advise anyone using this cable to not use “always hot” power, but instead to only use power tied to the ignition circuit.

Options robust suction cup that may maintain your system regular so you ll be able to hold your give attention to the highway and your palms on the steering wheel. Simple Installation and Removal Adjust the desired length and angle of the telescopic arm. We never get stuck in the past or in the mud. Designed using interchangeable base cups allowing you to customize the perfect snug fit. What You Get - PowerDrive 2 Alloy car charger, welcome guide, our worry-free 18-month warranty, and friendly customer service. Secure the Magic Mount with the automotive-grade 3M adhesive.

Reviews

There are no reviews yet.

Be the first to review “Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Toguard, Vantrue N2 Pro, N2, T2, N1 Pro, X4 Cameras”

Your email address will not be published. Required fields are marked *