417uzqZgwDL._AC_UL320_.jpg
417uzqZgwDL._AC_.jpg41usxe3DM0L._AC_.jpg

Direct Wire Harness for Pioneer Headunits (Compatible with Toyota and Subaru)

$14.40

1000 in stock

Direct Wire Harness for Pioneer Headunits (Compatible with Toyota and Subaru) Description

AHH-70-1761 Installation Diagram Get Ready for the Cleanest/Simplest Audio Install that You’ve ever done! The Pioneer connector is pre-wired to the Metra 70-1761 style connectors compatible with your Subaru or Toyota. All you need to do is plug it in! You will also need to connect the Reverse, Vehicle Speed, and E-brake signals if you need these features. If you’re using an AutoHarnessHouse.com 28-pin adapter, the install will be completely Plug and Play! Just plug in the 28-pin wiring adapter using the interface connector! Details Only Compatible with Pioneer models (See Compatibility List below)Connect your Pioneer NEX or App Radio headunit directly to your Vehicle with minimal wire soldering/crimping and without damaging factory wire!We use only high quality, large diameter wire and connectors. You will not be disappointed.Reverse, Vehicle Speed, and E-brake signals are provided from the Pioneer connector. +12v switched (Red) and Ground (Black) connections are also provided for connection of a steering wheel control interface or other +12v device.6-pin interface connector can be used to directly connect to the AutoHarnessHouse.com 28-pin adapter. (Fully Plug and Play Installation) If you will not be using the 28-pin adapter, just cut off this connector and do wiring as needed.Does NOT include the Parking Brake Bypass Module. The parking brake signal is provided for connection.Instructions Included Read more Vehicle Compatibility Information – Please make sure that BOTH your Vehicle and Pioneer Headunit are listed! Subaru 2013-2020 BRZ 2012-2014 Crosstrek XV (w/ nav) 2015-2020 Crosstrek (both nav and non-nav models) 2012-2015 Forester (w/ nav) 2016-2020 Forester (both nav and non-nav models) 2012-2014 Impreza (w/ nav) 2015-2020 Impreza (both nav and non-nav models) 2012-2014 Legacy (w/ nav) 2015-2020 Legacy (both nav and non-nav models) 2012-2014 Outback (w/ nav) 2015-2020 Outback (both nav and non-nav models) 2012-2015 WRX and WRX STI (w/ nav) 2016-2020 WRX (both nav and non-nav models) Toyota 1994-2018 All Models (except models with JBL audio) ***This Adapter does NOT fit Lexus models.*** Pioneer Headunit Compatibility Information Pioneer AVH Models: AVH-1300NEX, AVH-1330NEX, AVH-1500NEX, AVH-1550NEX, AVH-190DVD AVH-200EX, AVH-210EX, AVH-211EX, AVH-290BT, AVH-291BT, AVH-2330NEX, AVH-2400NEX, AVH-2440NEX, AVH-2500NEX, AVH-2550NEX, AVH-310EX, AVH-3500NEX, AVH-4100NEX, AVH-4200NEX, AVH-500EX, AVH-600EX, AVH-601EX, AVH-W4400NEX, AVH-W4500NEX AVH-X2800BS, AVH-X391BHS, AVH-X4800BS, AVH-X490BS, AVH-X491BHS, AVH-X5800BHS, AVH-X7800BT Pioneer AVIC Models: AVIC-5100NEX, AVIC-5200NEX, AVIC-5201NEX AVIC-6200NEX, AVIC-6201NEX, AVIC-7200NEX, AVIC-7201NEX, AVIC-8200NEX, AVIC-8201NEX AVIC-W6400NEX, AVIC-W6500NEX, AVIC-W8400NEX, AVIC-W8500NEX Pioneer DEH Models: DEH-80PRS Pioneer DMH Models: DMH-1500NEX, DMH-2600NEX, DMH-2660NEX, DMH-C5500NEX, DMH-C2550NEX, DMH-C2500NEX, DMH-W4600NEX, DMH-W4660NEX, DMH-WC6600NEX, DMH-WT7600NEX, DMH-WT8600NEX Pioneer MVH Models: MVH-AV290BT, MVH-210EX, MVH-211EX, MVH-2400NEX, MVH-300EX, MVH-S310BT Pioneer AppRadio Models: SPH-DA02 AppRadio, SPH-DA01 AppRadio, SPH-DA120 AppRadio 4, SPH-DA210 AppRadio 3, SPH-DA100 AppRadio 2, SPH-10BT Parking Brake MicroBypass Installation Guide Parking Brake MicroBypass The Parking Brake Bypass module is not included with this wiring adapter but many customers prefer to add it as part of their install. This guide shows you how to add it! Connect your Pioneer NEX or App Radio headunit directly to your Vehicle with minimal wire soldering/crimping (Metra 70-1761 type connectors are prewired to the Pioneer connector) Reverse, Vehicle Speed, and E-brake signals are provided from the Pioneer connector. +12v switched (Red) and Ground (Black) connections are also provided for connection of a steering wheel control interface or other +12v device. Compatible with all Non-JBL Toyota models 1987-2017. Does not fit JBL cars. Compatible with 2016+ Subaru models (as well as all BRZs) I was a little nervous, having NEVER installed a stereo before, but this harness made it stone-simple. I have a 2001 Toyota Tundra and after getting the stock ancient radio out, I was worried that i had the wrong harness because things didnt line up. Then in remembered to REMOVE THE AMP from the Tundra and immediately it became clear this was going to work well. The stock Toyota plugs fit exactly into the harness, which then fit flawlessly into the radio. Again, 10 minutes for a rookie here. I am a 64 year-old female office worker with no experience in electronics or auto mechanics, but I do internet research well. I watched a couple of YouTube how-to videos before ordering the part, and was able to purchase the right one to replace the broken radio in my 1998 Toyota Camry. The wiring harness exactly matched my Camry and the Pioneer radio I purchased. It took 30 seconds to plug it in and ensure it worked. Another 15 minutes to bolt the thing back into my car because I only had a screw driver to work with. Before even purchasing, AutoHarnessHouse tech support was great. All of my questions were quickly answered and they helped me determine exactly which adapters I needed for the install In my 2018 WRX.The build quality is very good and without the typical crimp, solder, heat shrink in many custom adapters, which allows for a clean install. Additionally, with their vehicle make/model specific harness, everything you need is integrated. In my case, the only exception being the radio and SiriusXM antenna adapters to keep my OEM antennas.These guys are very helpful and know their stuff about the products they provide, even nuance things about each vehicle. I highly recommend their products. Only two out of the three plugs actually worked or connected together. In the picture the top connector is from the car the bottom connector is from the wire harness that I purchased. It definitely does not look like a direct fit to me. The worse Part, is I can’t cut the connectors off and connect the wires because all 10 wires are different colors. In my Tacoma I installed a JVC KD-RD79BT with this Harness. I was not able to fit the connector to the stereo directly into the JVC unit since it is made for a pioneer, however there are divits on both sides of the connector that are slightly too big for this radio. I was able to file down the plastic on both sides of the connector and once that was done it was a natural fit! the pins are all the same and now my stereo is working flawlessly! This saved me alot of time! I bought the Pioneer AVH-1550NEX Double Din unit for my 3rd gen 4runner and this was a very easy plug and play. What normally would take me an hour to splice and solder wires, took 1 min. I recommend this if you don’t want to spend the time with all the wires. This harness to aid in installation of an aftermarket stereo in an older Toyota 4Runner made the job so much easier and faster than if I had gone the self inventive route. I would have had to study and decipher the wiring color schematics of the toyota wiring bundles, and how they related to the two Pioneer plug cattails. This reduced the difficulty level from say, passing a state bar exam to taking the SAT. The instructions did appear to make the assumption that the buyer would be aware of the differences between the 28-pin product and what my installation required. But it only took a few minutes of online research to solve that puzzle.Overall, the harness saved me several hours of frustration, perspiration and problem solving. The stereo in now installed and programmed. Now if there were somewhere I could road trip to …. This saved time splicing wires and dealing with possible bad splice. The only draw back I found it didn’t following Pioneers wiring colors on the wires. I installed a Park Break bypass and I had to trace out the wires because colors were different, other than that it worked great.

The magnetic mount is has a smooth surface that is perfectly suitable for mounting and holding any smartphone in place. please observe, the dashboard pad is for one-time use. Sellers of Amazon products are required to sign in at www. Including Android, Apple, Blackberry and Microsoft devices. Utilize the range, strength, and stability of the telescopic arm to find the perfect position for your smartphone. no buttons or two hands are required, the car phone holder only takes one second to g Works in most cars with cd slot featuring a screw tightening mechanism, simply insert the cd slot connector into your carâ s cd slot and lock it securely by turning the screw clockwise. AUKEY Car Phone Mount 360 Degree Rotation Dashboard Windshield Strong Magnetic Cell Phone Holder for Car Compatible with iPhone 11 Pro 11 XS Max XS 8 7 and More. 5 inches, so that it is compatible with 4-6. 3ft 1m,Hi-Fi Sound , Audio Auxiliary Input Adapter Male to Male AUX Cord for Headphones, Car, Home Stereos, Speaker, iPhone, iPad, iPod, Echo More.

Reviews

There are no reviews yet.

Be the first to review “Direct Wire Harness for Pioneer Headunits (Compatible with Toyota and Subaru)”

Your email address will not be published. Required fields are marked *