Glarks 540pcs 22-16/16-14/12-10 Gauge Mixed Quick Disconnect Electrical Insulated Butt Bullet Spade Fork Ring Solderless Crimp Terminals Connectors Assortment Kit Description
100% Brand new high quality insulated crimp terminals connectors Package quantity: 540pcs Red Wire range: 0.5~1.5mmÂ², A.W.G.:22~16, Max.current = 19A Blue Wire range: 1.5~2.5mmÂ², A.W.G.:16~14, Max.current = 27A Yellow Wire range: 4~6mmÂ², A.W.G.:12~10, Max.current = 48A Package includes: Ring M4——————————————-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Ring M5——————————————-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Ring M6——————————————-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Fork Spade M4———————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Fork Spade M5———————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Spade 250 Male (Semi-insulated)——-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Spade 250 Female (Semi-insulated)—-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Spade 250 Female (Fully-insulated)—-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Butt Splice—————————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Piggy back—————————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Bullet Male—————————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) Bullet Female ———————————-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs) NOTE: For best results, please use profession crimping tool Make sure this fitsby entering your model number. 100% Brand new high quality insulated crimp terminals connectors Package includes: fully / semi female / male insulated spade fork ring butt bullet Piggy back quick disconnect insulated crimp terminals connectors Package quantity: 540pcs Wire range: 22-16 ( red ) / 16-14 ( blue ) / 12-10 ( yellow ) A.W.G I liked the wide selection of connector types included, and they are conveniently separated into compartments. However, the quality is bad due to the thin material used. I had to crimp and re-crimp several times to keep connections tight, sometimes ruining the original connector. I was tempted to simply use aluminum foil because, honestly, these connectors are not much better. Oh well, you get what you pay for. If you want a quality product and good connections, these will NOT do the job.I have since found Wiring Depot, which has good quality connectors of every size, type, and material imaginable. Great price, strong build quality. I’d recommend heat shrinking a lot of your connections and soldering if possible to help them stay in place and remain protected. As far as the product goes, it includes a lot of paces for it’s price range so that’s a huge plus. Highly recommend and will purchase again when i’m running low on terminals! And the heat shrink makes a tight bond. I’ve been using them quite a bit and at first I thought they were pretty chintzy because the heat shrink looks like an unnecessarily thick piece of plastic that’ll never shrink. I was wrong, and as an added bonus the tips are plated in something that makes solder flow across it and bond like a breeze.You can make some 100% permanent wire connections with these if you want to. A little dielectric grease under the heat shrink before you seal it up, a good tinning on the wire and gratuitous amounts of solder wicked into the connection and the connector will be the last thing to fail on whatever connection you’re making.Why 4 stars? The case is the stuff of nightmares. It’s one of those with removable dividers, so you go to close it and there’s always one or two terminals that slipped under the divider that you have to fish out. Then…. They’re loose…I left mine sitting on the end of a board and bumped the board…. Electriskittles went everywhere but even worse – many of the dividers flew out too. I just pulled them all out and let everyone mingle, it was beyond salvaging. God help me if I ever have to sort that thing. Frustrating junk. Hard to get a solid crimp, the wire either ends up loose or seems tight but then pulls out later. The push on connectors usually get loose too except when they lock on with the force of 1000 suns. The box they come in have those removable seperators which allow the pieces to creep under or come loose and you quickly have a unorganized mess. I just wasted 2 hours struggling with these on what should have been a easy project. Tomorrow I will rip it all out and start again with good connectors. The Chinese do this on purpose with their products as a form of psychological warfare, commie bastards. I know they have the capability to manufacture something as simple as crimp connectors correctly for the same cost and yet here we are and its not like its just this product almost everything from China has something frustrating about it. To conclude this rant, spend the extra money and buy quality or waste your time like I did. Has just about every popular sized terminal for the DIY car mechanic. Even has the old type of three way spade connector that the newer T tap supersedes. This set doesnât have the T Tap. Does not have a ring terminal that fits the battery clamp bolt, either. Amazon does have other ASIN that do have that size. The case separates the different size terminals, except that my two fingers always pull up the dividers and the four different sizes get mixed up. Better to use a needle nose plier to pull out one terminal at a time so that the loosely fit divider doesnât drag up with your finger. Would order again when I run low in the future. The important part of the deal was the connectors. They’re good quality.The box arrived with one (of 2) clasp broken off, but they’re over-rated anyway for keeping small parts organized. They’ll all end up in a ziplock bag after one or 2 jobs anyway.In fairness, there was a friendly sheet in the box that indicated they’d fix any problems to make things right, but a cheap plastic box isn’t worth the time it takes to get rectified. That’s on me, not the vendor.Still, it would be better to provide a box that’s not prone to breaking than to count on a customer to take the effort to get satisfaction after the problem. Time has value, and spending it to get a problem (that shouldn’t have happened) rectified is a waste of labor hours. Product came in a cheap damaged box. I never did like those removable dividers that allow the spades to work themselves under and keep the lid from closing. The terminals are good quality though and work great. Given this, I give it 3 stars overall due to a cheap broken box (1 star) but the terminals are nice (5 star) Wasted driving and search time unsuccessfully looking at the big box store for the piggyback shape needed to upgrade my thermostat connections to WiFi control. Then wasted effort compensating for lack of the piggyback shape.I may never use 10% of these in 10 years, but for short money I will never have to go through this ordeal again. Also these are about 10X less expensive per connector when buying in packs of 10.Results for - lamicall. Lift up the lever on the phone mount and place it on top of the adhesive base. Including Android, Apple, Blackberry and Microsoft devices. Pull up locking lever and pull the tab of the suction cup for easy removal. 5mm Nylon Braided Aux Cable 3. We also do not refund the original shipping and handling that you paid on the order. you should utilize this cell phone holder for automobile vertically or horizontally both, extraordinarily versatile. Buy Lamicall mobile phone accessories at best prices from Ubuy. the closed-loop construction magnets make the magnetic pressure stronger and extra concentrated and doesn t have an effect on the sign.