Mpow Car Phone Mount, Air Vent Phone Holder, 3-Level Adjustable Clip, Upgrade Clamp Arm, One Button Release Clamp, Rotatable Phone Mount Compatible iPhone 11 Pro Max XS XR X 8 7 6Plus Etc


1000 in stock

Mpow Car Phone Mount, Air Vent Phone Holder, 3-Level Adjustable Clip, Upgrade Clamp Arm, One Button Release Clamp, Rotatable Phone Mount Compatible iPhone 11 Pro Max XS XR X 8 7 6Plus Etc Description

The role of the car phone holder is mainly to provide a carrier for the mobile phone. By fixing the mobile phone to the car phone holder, you can use mobile phone navigation, video and voice calls, etc.Product features of this car phone holder:1. Upgrade the car mount arm, change the curved clamp arm to the rectangular clamp arm, change the center of gravity of the clamp arm, and better hold the mobile phone2.The car phone mount is compatible with phones up to 6.8 inches, including iPhone 11 Pro Max, XS Max, XR, X, 8/7/6 Plus; Samsung Galaxy S10, S9, S8, Note 9/8/7 and more3. Upgrade the clip of the car phone mount, the 3-level adjustable clip is easy to install and disassemble, the clamping force is stronger, and it can be better fixed in the vent4. Ball joint design, you can rotate 360 degrees through the ball joint until the comfortable angle of view5. We have reserved enough space for the charging cable between the two car phone mount feet to ensure that the phone can be charged normally.6. On the surface of the product, the inside of the clamp arm and the car phone mount foot are attached with a sponge pad and a silicone pad to reduce the friction of the mobile phone and the mount, and protect the mobile phone. Adaptable to Most Phone Sizes: The phone holder expands up to 95mm/3.7in wide, holds most phones with screen sizes between 4.7’’ and 6.8’’, including iPhone Xs Max/XR/XS/X/8 Plus/8/7 Plus/7/6 Plus/6/6s Plus/6s; Galaxy S10/S10 Plus/ S9 Plus/S9/Note 9/Note 8/S8/S7/S7 Edge/S6 Plus/S6; Pixel/Pixel 3 XL/3/2XL/2/XL; LG; BLU; Xiaomi; Moto and more. TIPS: Supports phone case thickness up to 13 mm / 0.5 inch. Upgraded Arms for Secure Hold: The side arms have been upgraded for stronger stability. Compared with the old version, the center of gravity of the arms has been shifted up so that your phone stays put without wobbling. There are sponge pads on side arms, which will protect your device from falling out and scratching. Stays Put Without Falling Off: Featuring inner Manganese Steel plates and durable PC material, the extended vent clip will stay in place regardless of the road conditions. The spring-loaded vent clip is equipped with an adjusting lever, providing you with 3 different tightness. 1st level: 2.5 – 3.5mm; 2nd level: 1.8 – 2.5mm; 3rd level: <1.8mm, fits most vertical or horizontal vent louvers. Easy One-Handed Operation: The car phone mount has a quick-release button on the back. There is no need to expand the arms with your hands, just place your phone in the holder and squeeze the arms to hug your devices. Also, you are allowed to remove your phone without hassle. There is space between the bottom feet for you to attach a phone charger. Keep Your Phone in Sight: The 360 degrees ball joint ensures that you hit the sweet spot every time you place your phone in the car phone holder. You can get the comfortable viewing angle by adjusting the mount up/down or vertical/horizontal. The air vent-mounted car mount enables you to access your GPS, music and all controls easily without blocking your vision while driving. I bought a Mpow Vent Phone Holder for my car and love it.I gave it to my wife to try and she asked me if she could keep it. The end result is that I now have four of them for our three cars and truck.I noticed that some people have mentioned that it comes loose on the vent.I think this is because they are not moving the lever that tightens the holder to the third position.If you don’t hear the third click it is not as tight as it can be.We have our Mpow holders in four different types of vehicles and none of them have come loose. Gary H With the lower price point I was unsure what to expect with this product. You almost always get what you pay for. But after pulling it out of the packaging I was pleasantly surprised. It does have all the movement you would need to your cell phone and the right position you want to see it again. It has an easy locking clip good after you’ve done it two times you can take it on and off in seconds. What I like the most is the arms that slide in and out with the button on the bottom back of the device. It’s not a fragile plastic feeling that you think will break after a month or two. to unlock your phone you simply push the button on the back and the foam covered arms release allow you to pick your phone out.I can easily see why this has so many positive reviews. Great value good product if you’re looking for something to hold your phone not much can beat this. I LOVE this mount! I tortured myself trying to figure out which car mount to get. I ended up deciding that this one was best for my 2015 Toyota Prius V.I like that because it’s attached to the air vents, it’s closer to me and easier for my over 50 year old eyes to read. It is easy to install and use. I’m very happy with my purchase and wish I had bought one earlier.I used to use the car’s built-in GPS but it’s not nearly as good as navigation apps on my phone. Now I can use and see them! Easy to install and use. The Mpow car phone mount is a high quality device that does just what I was looking for. The mount itself works well. It clips securely to my vent and holds my phone firmly in place. I like the way squeezing it easily grips the phone, and the button in back smoothly releases it to drop into my hand. Dropping into my hand relates to my problem and the four instead of five stars.My vent does not have enough friction to keep the mount upright. The vent holds the mount upright on its own, but put in the phone and everything drops, so I cannot see the phone screen. I give the mount four stars because the mount does tilt up, but not far enough for my situation to hold the phone where I can see the screen. I will be implementing a work-around by putting wedges above and below the vent to hold it in place so the mount can hold the phone upright.Regardless of its limitation for my car, I would buy this mount again and would recommend it to friends. Everything I expected and works well! Fits great and I have a Samsung Galaxy S10 Plus with a full protection hard case. The cushioned side arms even open a bit wider than my phone with the case on it. It does have a firm grip on my vertical vent as long as its placed at the bottom, as shown in the pics. When placed any higher it does not hold as well. The only disadvantage I can see for some people is if your vent is close to your steering wheel or you have big hands. I like mine positioned close to me therefore if it were any closer to my steering wheel, it would not work for me due to hitting it while driving. Great product, very pleased! Perfect fit for the vent for our car

Mpow Car Phone Mount, Dashboard Windshield Car Phone Holder with Long Arm, Strong Sticky Gel Suction Cup, Anti-Shake Stabilizer Compatible iPhone 11 pro 11 pro max XS XR X 8 7,Galaxy, Moto and More. Web enthusiast. 5 inch and pivots on 225 degree arc for a variety of optimal positions Universal Mounting Holds all phone and case combinations from 2. The phone holder can be attached to the cat dashboard or curved surface. â andobil multifunctional automobile cellphone mount with the newest improved suction cup and vent clip stronger tighter , this cellular phone holder can maintain your cellphone firmly on dashboard windshield or air vent, even on the bumpiest highway.


There are no reviews yet.

Be the first to review “Mpow Car Phone Mount, Air Vent Phone Holder, 3-Level Adjustable Clip, Upgrade Clamp Arm, One Button Release Clamp, Rotatable Phone Mount Compatible iPhone 11 Pro Max XS XR X 8 7 6Plus Etc”

Your email address will not be published. Required fields are marked *