Mpow Car Phone Mount, Dashboard Car Phone Holder, Washable Strong Sticky Gel Pad with One-Touch Design Compatible iPhone Xs,XS MAX,XR,X,8,8Plus,7,7Plus,6,6Plus, Galaxy S7,8,9,10, Google Nexus, Black


1000 in stock

Mpow Car Phone Mount, Dashboard Car Phone Holder, Washable Strong Sticky Gel Pad with One-Touch Design Compatible iPhone Xs,XS MAX,XR,X,8,8Plus,7,7Plus,6,6Plus, Galaxy S7,8,9,10, Google Nexus, Black Description

Broad Compatibility Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm. Sticky Suction Cup The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer. Anti-fall Adjusting Knob You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process. Read more Anti-skid and Anti-scratch There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place. Rinse and Reuse If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want. Warm Prompt The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder. Read more Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction) Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving. 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches. All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands. Ball joint slipping? Use the tip of a rubber glove to give it more friction. I had been using a phone holder in my car for quite a while but got tired of cleaning the back of my case to get the gel circle off. I saw this item that rated very well. I purchased this item and I have to say it earns a 5 star rating. The suction cup will hold on about any spot on your dash. It also has many adjustments so you can have it fit the way you like it and it will stay. It holds my iPhone 7+ very well. Also if your dash is deep the extension of the shaft will adjust. If you need a good phone holder look no further.ThanksHenry This huge mount comes in a white tiny box. It’s made of hard plastic and I would see it brake if you’re super tough with it, besides that it should work perfectly. The suction cup is well built of this awesome sticky material, so it would work even on them porous dash. You have the suction and the stickiness material and it shouldn’t move or come off even on them bumpy roads. The sides brackets opens slowly with the push of a button no need to force them out or back in. It has the telescope feature in which you can set it close to you or away from you. So far it has been doing what it supposed to do, if anything breaks because of factory issue, I will come back to this review and let you know. So far so good… Here are some pictures. Absolutely one of my best purchases of the year. Make sure where you want it before you take the plastic off of the suction cup, because the adhesive makes it difficult to remove. There’s an adhesive on the suction cup which is what keeps it in place in an 18 wheeler driving across Louisiana roads. But it doesn’t leave any residue behind if you do have to remove it. Driving through Shreveport, LA in a truck is a challenge for anything attached to the dash, this stays right where I put it on the dash, and my Galaxy Note 8 fits in it very well. There’s easy access to the charging port while the phone is in the mount. Just put the phone in and squeeze the edge to the sides of the phone. The two tines on the bottom swing out to give the phone support from the bottom. Then when you get out and want to take your phone with you, just press the button on the side and the mount releases it’s grip on your phone. Well designed, great product, that out performed my expectations. Received the product the day before this review. I used it for a single 35 minute drive to work and already can tell I will have no regrets.Simple to mount. Simple to adjust. Simply put, it’s an incredible amount at this price point.Added bonus is that the rotation ball was already popped into place. Just needed to attach the holder to the mount and hit the road.Directions are step by step with pictures. I can’t think of any reason you would regret this purchase. The company sent me the newer version as my purchase came with a 2 year warranty. I have had it in my car for about 2 weeks so far and it seems to be sticking a lot better than the old version of this stand. It was easy to install and has not been loose at all. My only complaint is that it does block my phone’s ear jack so I can’t plug it into my radio but it works great otherwise.Old review: I had to take my phone out the case but It worked great for the first few months, so much that i bought another one for my family’s car. But then popped off one day and has not be sticking since. I even clean the spot i had it and bought new adhesive pads and nothing. Waste of money. I use my phone as a Dash Camera and need a mount that is highly adjustable, mountable to my dashboard as oppose to vents or disk drive, and, most importantly, capable of holding the phone in landscape mode. This mount accomplishes all of these for one of the best prices. I’ve actually purchased two, after trying one of those “auto-charging” mounts (which don’t work well because a warm car is not a NFC Charging friendly car…).The adhesive is a gel adhesive coupled with a suction cup. The gel isn’t too thick, so even if your car warms up and the gel becomes a bit runny, the suction still holds and the mount will not fall like previous models I’ve used. It is adjustable in all three dimensions, including portrait/landscape mode, brings the phone closer or farther to you, and can elevate the phone to ensure it’s positioned exactly where you want it. It comes with a pad that improves adhesion by smoothing out any texture on your dashboard. I bought this to replace a different one that continually fell off the dash whenever it got warm inside the car. The previous one had a long telescope type arm that was too top heavy causing it to fall off. This one has a much smarter “stacked ” sort of design where the weight stays basically centered, ensuring it stays safely where you put it. I can adjust the height and tilt and lock it in place, so far it’s stayed. It’s width is adjustable to hold all phones (it opens quite widely) and doesn’t get in the way of my charger. Fits easily with both my case and pop socket. Only minor issue is that I find the release button to get your phone out awkward to reach. All in all really happy with this purchase!

item 3 SCOSCHE MAGDMB MagicMount Universal Magnetic Mount Holder for Mobile Devices. We always aim for make sure our customers love our products, but if you do need to return an order, we re happy to help. The Easy One Touch 4 phone mount features an adjustable Telescopic Arm that can reach and extend from 4. WixGear Universal Air Vent Magnetic Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. simply put the phone in and the arms automatically close around it. Мы и наши партнеры будем хранить информацию на вашем устройстве и или получать доступ к ней, используя файлы cookie и аналогичные технологии, чтобы показывать персонифицированные рекламные объявления и контент, оценивать эффективность рекламы, контента и взаимодействия с аудиторией, а также разрабатывать новые продукты. IT S ONLY FOR ANDROID PHONES AND USB-C IPADS CHARGING. Cd slot mounts-does your car cd player go unused make it functional again with mpow phone holder.


There are no reviews yet.

Be the first to review “Mpow Car Phone Mount, Dashboard Car Phone Holder, Washable Strong Sticky Gel Pad with One-Touch Design Compatible iPhone Xs,XS MAX,XR,X,8,8Plus,7,7Plus,6,6Plus, Galaxy S7,8,9,10, Google Nexus, Black”

Your email address will not be published. Required fields are marked *