SCOSCHE CR1291B Double DIN Stereo In-Dash Installation Kit Compatible for Select 2007-Up Chrysler Sebring, Dodge Avenger, Caravan/Grand Caravan, Nitro and Jeep Wrangler Vehicles


1000 in stock

SCOSCHE CR1291B Double DIN Stereo In-Dash Installation Kit Compatible for Select 2007-Up Chrysler Sebring, Dodge Avenger, Caravan/Grand Caravan, Nitro and Jeep Wrangler Vehicles Description

Style:Dash KitFor 40 years, Scosche has been producing high quality, affordable Car Stereo Dash Dash Kits, Vehicle Wiring Harnesses, Adapters, Interfaces, Amplifier Wiring Dash Kits, Cables and other 12V installation accessories. We know how you feel about your vehicle, so we will not design, engineer or deliver a product that does not meet our extremely high standards. When you purchase a Scosche installation accessory, we have you covered. We offer Lifetime Tech support which means our knowledgeable tech team is available to answer any product questions you may have for as long as you own the product. We are so confident in our product quality that we back all Scosche 12V installation accessories with a Limited Lifetime Warranty. Allows new aftermarket stereo to be installed in factory location Fits Double DIN stereos with a maximum screen size/faceplate opening is 3 13/16″ x 6 13/16″ (96.8mm x 173mm) Precision designed for a gapless fit between the dash and the Dash Kit Color and Texture matches the factory dash Easy to install. No special tools are required. Includes step-by-step instructions Fits my 2017 Jeep Patriot perfectly. No gaps on the sides or top and bottom. The previous dash kit I had was a Metra one and it did not fit this touchscreen JVC that well so I finally decided to try a different brand and good thing I found this one. It fit my 2010 Jeep Wrangler perfect no Modifications needed and it works as advertised I am 100% satisfied This product was priced just right and fits my 2015 Jeep wrangler perfectly. It came with no screws, butdifferent radio units have different size screws. Just run to your local hardware store or junk draw for screws and you’ll be happy you bought this item. Looks good in the bag. Will update in a few daysUpdate::2014 avenger is NOT compatible with this kit. Wiring harness is not the correct one. You will need CB4000SW. Not CB04B, which is supplied. Had to spend another 50 bucks to get it from walmart. Purchased for my Jeep Grand Cherokee. Most of the kit worked fine, like the wiring harness and other parts of the kit. The most important part in my opinion, which are the brackets are cheap and flimsy and the mounting holes did not line up to my radio so I had to adjust them to fit. The flimsy plastic also flexes too much when you tighten it down on the radio and makes the radio look cheap in my car. I’m currently looking for another type or brand that will look cleaner in my Jeep. I was a little hesitant at first- this was my first time ordering car audio equipment on Amazon, but this worked great for my 2012 Jeep Patriot. The plastic for the mounting is a little cheap, but it matches that charcoal grey of the dash. All connections were fairly straightforward and the stereo that I put in works as it should. Two important things- 1) the plastic bracket was a little deep for the mounting area on my Jeep, so I had to use the Dremel to notch out some of the bracket to make it fit. If you have a double din stereo with a CD player you might have to cut out the mounting bracket in the car. Mine was very shallow since it did not have a CD player (dead tech) and only needed a bit cut from the plastic bracket. 2) Per the description, this needs a switched 12v power source as well as a continuous source, which means that the red wire on the harness needs to tap into something that turns off when the car is turned off (the 2012 patriot does not have one). I tapped into the cigarette lighter underneath which is a switched 12v source. There are some good videos online on how to do this, but if you have no electrical experience get someone to help you. Overall a good buy for a 2012 Jeep Patriot. I got this to mount a Pioneer DMH-w4660nex in my 2015 Jeep Wrangler, which otherwise has a stock dashboard. Long story short, there was no way to get this mount to fit properly in the Wrangler with this radio. It was a little too wide and the only way to get the dash to snap closed was to move the radio too far back so it didn’t look good. This is a short nose head unit; I would say that maybe this bracket works well for long nose units, but for my situation it was no good and I couldn’t get it remotely flush to the dash. I ended up ordering the Metra 95-6511 and that worked so much better and feels much higher quality than this SCOSCHE. The SCOSCHE feels like cheap plastic and I really prefer the matt appearance of the Metra vs the shiny SCOSCHE. The SCOSCHE is also visibly hollow so if there’s any gap you can see straight into it. Overall, if you’re putting a short nose Pioneer in a Wrangler JK, I’d avoid the SCOSCHE. Worked as advertised. Filled gap from aftermarket stereo install in son’s Jeep. Worth the price for what it is. Installed on 2008 Jeep Wrangler.

Adjustable cup base the cup holderâ s base is easily adjustable, having a wide compatible size with most cars. SCOSCHE MAGDMB MagicMount Universal Magnetic Mount Holder for Mobile Devices In Frustration Free Packaging, Black. Very simple design. Compatible With . On the Amazon storefront, the exact name of the product is listed as WeatherTech CupFone with Hand Sanitizer Holder, Cell Phone Holder for Car, Phone Mount - Universal Cup Holder Fit . Ваши персональные данные, которые могут быть использованы. The AINOPE Car Phone Holder Mount 22. Flexible Adjustment The car mount holder can be adjusted to the perfect viewing angle with its 360 flexible ball head.

Additional Information

Weight 0.44 Pounds lbs


There are no reviews yet.

Be the first to review “SCOSCHE CR1291B Double DIN Stereo In-Dash Installation Kit Compatible for Select 2007-Up Chrysler Sebring, Dodge Avenger, Caravan/Grand Caravan, Nitro and Jeep Wrangler Vehicles”

Your email address will not be published. Required fields are marked *