[Upgraded Version-2nd Generation] Miracase Universal Phone Holder for Car, Air Vent Car Phone Holder Mount Compatible with iPhone 12 Pro Max/11 Pro Max/SE/XR/XS/8 Plus and All Phones,Black Description
Miracase 2020 Upgraded-2nd Generation Miracase Phone Car Holder We are a professional cell phone accessories research and development company, focusing on cell phone accessories field for more than 9 years, our belief is to provide the best products and service to all users. In the past two years, we have sold over One Million car phone holders and received feedback from over 100,000 customers. Our product development team has greatly improved our product based on this. What Have We Improved? Much Stronger and More Durable Upgrading to metal will make the clip hook much stronger.The electrophoretic surface treatment will greatly increase the wear resistance and corrosion resistance of the hook. More Stable and Secure The vent clip will clamp the vent blade securely, which make the phone holder more stable. Greater Compatibility With extended and retractable design(Max 1.4 inches/3.6cm), the phone mount holder can fit for more cars’ vents. Easier to Install and Remove Due to upgrade to the metal material, we’re able to reduce the height of the hook without reducing the strength. So it will be easier to install and remove. Read more 2020 Upgraded-2nd Generation We greatly improved our car phone mount based on the feedback from over 100,000 customers.This cell phone holder for car could work better for you even in extremely harsh environments. Reserved Charging Space Reserved space for your charging cable. Won’t block the charging port of the phones, you can keep your phone charged at any time. Stable 3-Point Support Firmly hold your phone in the cradle of Miracase car phone mount. No worries for speed bumps, sharp-turns, off-road roads. Read more Installation Instructions How to Install Unscrew the nut1, place it on the ball of the phone mount clip.Insert the ball into the back of the adjustable clamp head until you hear a “Click”.Tighten the nut1. The tighter the nut, the harder it is to rotate the clamp head.Loosen the nut2 at the end of the phone mount clip and make the hook stretch out to the right length. (If not sure, you can adjust the hook to the max length).Make the clip hook downward, then press the button to make the vent clip open and clamp the air vent blade.Make sure the vent clip clamps the air vent blade, then tighten the nut2 at the end of the clip so that the hook will catch the vent blade tightly. Installation complete! This car phone mount fits all phones from 4â to 7â and thick phone cases(such as Otterbox, battery cases). Including but not limited to the following mobile phone models: Compatible with iPhone 11/ 11 Pro/ 11 Pro Max/ SE 2020/8 Plus/ 8/7 Plus/7/XR/X/ XS max/XS/SE/6S/6 Plus/6S Plus/6; Compatible with Samsung Galaxy A20/A10e/S20 Ultra/ S20+/ S20/ S10+/ S10/ S10e/ S9+/ S9/ S8+/ S8/ S7 Edge/ Note 10 Plus/ Note 9/ Note 8; Compatible with MOTO G7 Power/G Power/G8 Play/G7/G6/Z4/E6/E6 Plus/E5 Compatible with Google Pixel 4/ 4XL/ 3/ 3a/ 3XL/ 2/ 2XL/ XL, Nexus 6P/ 6/ 7/ 5X, Compatible with LG G8/G7/K50/ThinQ/ G6+/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus, Compatible with Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc. Please Note: The total thickness of the phone and case should be less than 0.79in(2.0cm). 4-In-1 Cell Phone HolderVent Phone HolderVent Phone HolderVent Phone HolderAir Vent ClipGeneration2nd-Generation2nd-Generation1st-Generation1st-Generation2nd-GenerationMount TypeDashBoard&Air Vent&WindshieldAir VentAir VentAir VentAccessoryClamp HeadLuxuryLuxuryLuxuryClassicNoneCompatible with Thick CaseââââNone ãNEVER FALL OFF-2020 UPGRADED 2ND GENERATIONãWe greatly improved our car phone mount based on the feedback from over 100,000 customers. We upgraded the material of vent clip hook to metal to make it much stronger; we also greatly improved its structure, so that this car phone holder can stay more firmly and securely, and it’ll be compatible with most cars. So this cell phone holder for car could work better for you even in extremely harsh environments. ãUNIVERSAL COMPATIBILITYãSuper wide adjustable arms design enables Miracase car cell phone holder to fit for all phones(4.0-7.0 inches), thicker cases(Included Otterbox) and other devices(width between 2.1-4.0 inches), such as iPhone SE 2020/11/11 Pro/11 Pro Max/ XS/XR/XS Max/X/8/8 Plus/7/7 Plus, Samsung Galaxy S20/S20+/S20 Ultra/Note10/Note10+/S10/S10+/S10e/S9+/S8+/Note8/S7/S7 Edge,Sony,LG,Google,Sony,Nokia and all cellphones, GPS device. ãSTABLE AND SAFE CAR PHONE MOUNTãWith the anti-slip sponge and rubber pads, stable support shelf, 2-nd generation latest vent clip. Miracase phone mount holder will offer a secure grip for your cellphone to ensure safer driving and protect your phone from dropping and scratching. The smartphone will securely stay in the car cradle, which won’t distract you from driving. ãEXTREME FLEXIBLY & ONE-HAND OPERATIONãThe 360-degree rotatable head gives you the best viewing angle and enables you to quickly switch to any orientation(horizontal, vertical and more)you want, so you could see the phone screen clearly and keep secure driving. The quick-release button and adjustable clamp arms make it very easy to insert and remove your phone with a single hand. Provide you with safer driving whether you are talking, navigating, listening to music or charging. I am a picky and demanding person, research products and expect them to perform as expected. I have tried MANY different phone holders, from ball and magnet to vent to cup holder. All have fallen short of expectations. Vent holders simply fall off, cup holder ones take up the use of the cup holder for cups, and magnet ones eventually fall off when the inside temperature gets too hot. I had purchased a magnetic mount that glued to my dashboard that worked well until the internal heat in my car made it fall off. I purchased an epoxy that I used, additional earth magnet discs to increase the strength and that worked well for a while. I was shocked to find on the first 100 degree day to find my phone on the floor along with the mount. Frustrated, I started a search for yet another mount. I started considering a windshield mount, but reviews stated that the suction failed either over time, or with excessive heat. The search continued. I stumbled upon this vent mount and was intrigued, especially since I never had success in the past. What I looked about this particular version was the small arm that grasps the vent blade from behind, pulling the tension of the mount tight to the vent itself. Additionally, the fact that this unit had been updated to have the arm made of metal further gave me hope. Let me say that this mount is by far the best mount I have ever purchased. It took 10 seconds to install, can be removed in another 10 seconds, is extremely sturdy with no movement or vibration, and can be placed on most vehicles. I tried it on my Outback as well as my wifeâs Prius and the mount fit nicely. I wish I had found this mount some time ago. It was have saved me money, and the permanent disk epoxied to my dash from the prior mount. You will not regret this purchase. Great design. This is the second product I purchased from Miracase. It fits my Toyota Prius Car vent and was very easy to install. Best of all it accommodates wide phone cases! Now both our cars have their products! This is the 3rd cell phone holder Iâve purchased. This one fits perfectly in my Honda Civic air vent! Plus-it holds the phone (iphone 11) with the wallet case so I donât have to take the phone out every time I use the holder. Perfect! I’m not a fan of the suction cups or having to stick a magnetic strip on my phone to use the magnetic ones so I’ve had my fair share of vent mounts over the years. With most vent mounts you just slide the mount onto the vent blade and you’re done. The problem with that is there’s no stability. Over time they wear out and fall off. Miracase made sure this doesn’t happen with this mount. The directions come in several languages and they’re REALLY easy to follow. Not only is there a hook arm that grabs behind the vent blade to hold it in place (which you can tighten to your liking) but it has a clip that is opened by pushing a button so it can grab onto the blade giving the mount extra stability. Once the mount is on the vent you can tighten or loosen the nut to your liking but make sure not to overtighten as you could possibly snap the vent blade.After driving around on some less than desirable roads (thanks to roadwork being done) I have to say, I’m extremely pleased with how well the mount holds up. There’s no jossling or slipping when going over bumps or around turns. And, because of the design it’s really easy to see my phone for navigation without having to look down or block the sun glare. I can simply loosen the nut, rotate the mount to turn my phone away from the sun, and tighten the nut again to hold it in place. The auto-release button on the back of the mount is an awesome feature and works great making one-handed phone removal a piece of cake.This mount is definitely worth the money! The holder is very durable so far, it was easy to install once you realized you unscrew the metal hook to latch the back of the vent. You can then clamp it as well onto the front of the vent. It makes it by far the most sturdy case I have bought. The only very slight drawback is there isn’t much rotation horizontally, enough to see the screen ok, but I would have liked a little more rotation. The last feature I really liked was that to tighten my phone you simply set in place and squeeze and it holds the phone perfectly. Then, to release simply push the button on the back of the case and the 2 side flanges release allowing you to grab the phone without tugging or pulling on the case. This is a general-purpose mobile phone bracket. It is easy to install and has instructions. It’s easy to fix the mobile phone on it. I’ve driven through bumpy roads without any problems. The price is appropriate. You can buy it at ease I have last year’s model and was pleased with it. Hooks into my 2014 Kia Sorento vents with no problem and holds my S9 securely. So great, got one for my mom – holds her Pixel in her 2019 Chrysler Pacifica. So, I moved my holder into another vehicle (1996 Bounder RV if you’re counting the vehicles) and had a moment of panic when I saw the original wasn’t available – followed the link for the new 2020 2nd gen model. Well, finally something positive in 2020 besides my kid’s teacher’s covid test. Been using it for 3 days – other than having to relearn where the release button is this one is Even Better! Clamps on the phone are smoother, mechanism was easier to set and tighten down – just all around greatness. Nice job Miracase. This held my phone in the vent very well. Recently, drove 5500 miles with many rough roads, forest roads and interstate and it didn’t have any issue with it holding my phone.Since it’s a vent mount I did not want it obstructing my vent (drivers side). I mounted on the passenger side and rotated it so I could view it. The issue is the rotation angle L/R is quite limited and was annoying for my mounting. It needs about another 10-15 deg in my opinion. I did make a mod to it so I could use it in my situation, but it could be done easy enough in Rev 3.One-hand management, simple to select up and put again your cellphone with one hand. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. You ll be asked to select a delivery method during checkout. Every Product includes a 45 days money back 24-month worry-free. Are you sure you want to stop following. Buy Lamicall mobile phone accessories at best prices from Ubuy. AINOPE Gravity Phone Holder. Chemical Guys Leather Cleaner and Conditioner Complete Leather Care Kit 16 Oz 2 Items . robust and sturdy made with an adjustable heavy base and sturdy plastic, the cellphone holder will securely lock in your cup holder.